Its here! 690 Rally Lite is the best of both worlds.
Light, yet capable of protecting the rider from the elements. Rally or traveling this is the kit to have. With side shrouds designed from scratch, to match the bike’s aesthetics, this will be a kit that will transform your 690 to a lite traveler like no other! Convert to a full rally by getting the Super 690 kit and get all possible combinations depending on your mood or the terrain ahead!
The major changes that the 690 enduro received during 2019, made it easier to ride, but also a formidable opponent in long distance rallies. The kit that we propose is based on rally proven parts, with new designed side panels for unparallel aesthetics. True to our heritage, this kit is the basis for our 3 in 1 deal. Should you want at a later stage to add the rally tanks from KTM™ , you can get he Super 690 kit and transform your bike to a long distance traveler with more than 600km fuel range!
More information below...
- Navigation Tower which is made from Aluminium, steel and polymers. This is the tower that has won the Morocco Desert Challenge with Joakim Lundby and since its birth there are no structural failures. The tower comes complete with lights. Hella Projector as a main beam with a cut off so that you do not blind the fellow riders/drivers even when a LED or HID bulb is installed. High beam is a street legal LED unit from Hella, taken directly from the 2019 KTM 450 Rally Replica bike.
- LED position light, 7 colour options.
- All wiring harnesses needed, the low beam stays on when the high beam is turned on.
- Side panel brackets.
- OEM Speedo bracket.
- OEM radiator guard suitable for the kit.
- Side Panels made of flexible ABS, pre drilled and painted. There are two side panels per side, which are bolted together, all the required hardware is included.
- QuickCharge 3.0 USB charger.
- CNC polymer cable guide.
- CNC Aluminium spacers.
- Position for ABS light, stock USB outlet and five warning lights (or toggle switches).
- KTM OEM Stone guard.
- KTM OEM Light support.
- KTM OEM Windshield pre-assembled with rubber grommets and spring loaded black Dzus fasteners.
- Screen bolts (x2 – the other 4 OEM ones are used from your own bike) with wellnuts (x6).
- Navigation backplate.
- Roadbook backplate comes with a dedicated back plate for a roadbook holder of your choice.
- Dual GPS backplate comes with a back plate capable of housing two GPS units or one GPS and one tripmaster.
- CNC spider head clamp. Patent Pending. Warrantied for life.
The kit can also be converted to a full rally bike by getting the ”Super 690” kit at a later stage.
Since 2016 there are no failures of our legendary 701 headclamp. The new design allows the riders to enjoy the ease of installation, as it does not affect the bike in any way. Using the latest software to analyse the forces involved during everyday riding, crashing and racing we were able to manufacture a billet part that will serve you for the lifetime of the vehicle. Should the forces become excessive, other parts will start bending in the assembly to prevent damage to the frame allowing you to reach your destination no matter what luck throws at you!
Travel or race in one package
Long distance travelling or racing is never an issue with the Aurora Rally kits. The navigation tower will accept a racing back plate and the ABS side panels with the screen have ¼ turn bolts for ease of use. Actually, only two M6 bolts need to be removed to undress the whole front part of the bike. The bike remains narrow, yet the protection of the elements is increased due to the rally KTM™ shield which is wider and the higher than the new, 2019 rally screen. Function and protection are a must in our model range.
One of the most important parts during travelling or racing is the navigation tower. The part that houses the lighting system, the GPS/Mobile or, if racing, the navigation gear. With our advanced navigation tower, you can be assured that you will reach your destination to take corrective actions even after a fall. Stainless steel, combined with naval grade aluminum and polymers allow this tower to be flexible, yet stiff. The vibration dampeners on the back plate further protecting the valuable navigation equipment that is being used by attenuating the vibrations transmitted from the head stem of the bike to the system. Being in the rally scene for so long we know that service of the parts is inevitable. The tower comes preinstalled with special rivets that make the disassembly a breeze!
Travelling in the dark is part of the motorcycle life. That’s true, but it doesn’t have to come at a price! With the Aurora Rally Equipment 690 Lite kit the lights are upgraded to a full 60mm projector and a Hella LED high beam, both fully legal. The option to upgrade at a later stage to a Baja Design Squadron Sport or Pro for off-road riding is always there so you can future proof your kit. The seven colour RGB light, a trademark to our rally kits allows you to customize the look of your bike, and the position light cover is 3D printed with the Aurora Emblem because the quality is hidden in the details.
Stock wiring loom
There is no need to modify anything on your bike to install our electrical harness. Everything comes pre-assembled and our IP67 rated connectors will ensure that whatever the weather you will not be left out in the dark. When you turn the high beam on the system, the Aurora Rally Equipment wiring harness keeps the main beam on to ensure maximum. Now you have even more time to prepare for that trip!
Everything comes pre-assembled
From Aurora Rally Equipment you get a Rally kit that comes pre-assembled. That means that most of the work is already done and there are no trivial questions to be answered before you install the kit. All the Dzus fasteners and ¼ turn bolts are pre-installed and the kit can be installed in a few hours. Get it on Friday, travel on Sunday!
Seeing is believing