Available in store
Close
The BMW R 1200/1250 GS Wheel Service Kit for front and rear wheels is built around the Multifunctional Eastbound HEX Axle Tool. The complete kit packs in a small 17cm x 9cm (6.6″ x 3.5″) canvas pouch.
Do repairs (or maintenance) anytime, anywhere with this compact R 1200/1250 GS wheel removal kit.
An added bonus of this Kit is the multifunctional Eastbound HEX axle tool. The 3/8″ square socket drive ends and knurled centre ring make it possible to use the unit as a “screw driver” type handhold. With the 3/8″ square socket adapter in one of the tool ends it can be used with a large range of HEX, Alan key or Torx sockets. The 10 mm bit drive adapter is suitable for smaller and lighter screw driver bits, Alan key bits or Torx bits. Add a set of assorted sockets and Torx bits that suit your bike and you have a complete ‘toolbox’ at hand. (Note that screw driver is not included in this kit)
The R 1200/1250 GS ‘s rear wheel bolts require a fairly long tool with a T50 Torx to properly access and remove the T50 Torx bolts. The combi of the 70mm HEX axle tool and the 75 mm T50 Torx provides sufficient tool length to conveniently fit the T50 Torx on the wheel bolts and to stay clear from the tyre with the lever.
To remove the front wheel of the water cooled 1200/1250 GS series, you need a 17mm wrench to remove the axle bolt and a T45 Torx to loosen the pinch bolts and a 13mm socket to remove one or both of the brake callipers to allow the wheel to pass between the fork legs. All these tool elements are included in this special kit.
You can simply extend your R 1200/1250 GS Wheel service kit with the Tyre Repair Extension Tool Kit. With this extra kit you can service the bike wheels, brakes, change a tyre. When you damaged the rim and it won’t hold air, you can install a inner tube. Unfortunately this isituation is not an exception!
Note; some BMW rims require preparations/modifications before you can install a tube.
There are no reviews written yet about this product..
Vervolledig u aankoop
