ROX 2" Pivoting Risers for BMW R1200GS Watercooled (2013-current)
New Rox 2 inch pivoting risers for the new R1200GS Liquid Cooled bikes that come with the larger diameter 1 1/4 inch handlebars. These risers will NOT work on the older R1200GS’. The risers come with caps to replace your OEM clamping caps. Click on the thumbnails to the side for more info. We had to use our own caps to clamp the risers because the OEM caps are too tall. We wanted to make sure all stock cables and brake lines could be used with these risers. Making this riser a 2 inch rise and supplying our own replacement caps was the best way to do that. Anodized Clear. Always check and confirm that your vehicle has adequate cable and brake line length before installing any handlebar risers.
- 2" of Rise
- 1 1/4" Stem
- Accepts 1 1/4" Handlebar
- Lifetime Warranty
- Made in the USA
- Pivots Forward/Backward depending on rider preference. Note: These risers aren’t designed to be positioned straight up because it can be difficult to access the BMW bolts to tighten the stem of the riser in place. For riders looking to go directly up from where the bar is currently we recommend our fixed position risers instead.
- Works with Stock Cables — see our cable rerouting instructions below
These risers are specifically designed for the 2013 and newer R1200GS Liquid Cooled bikes that come with 1 ¼” handlebars. These risers will NOT work on the older R1200GS’. The risers come with caps to replace your OEM clamping caps. Click on the photos above for more info. Anodized Clear. Patented by the US Patent and Trademark Office under US Patent #6,920,806.